Electrolux KDFCC00K, User Manual

Page: 13 / 32

The display shows the new time.
To change the time of day press
again and again until starts to flash.
7.3 How to set: Duration
1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Press or to set the minutes
for Duration.
4. Press or the Duration starts
automatically after 5 seconds.
5. Press or to set the hours for
Duration.
6. Press or the Duration starts
automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes. The display shows
flashing
and time setting. The oven
turns off.
7. Press a sensor field to stop the
signal.
8. Turn off the oven.
7.4 How to set: End Time
1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Press or to set the End Time
and press . First you set the
minutes and then the hours.
When the set time ends, the signal
sounds for 2 minutes. The display shows
flashing
and the time setting . The
oven turns off automatically.
4. Press a sensor field to stop the
signal.
5. Turn off the oven.
7.5 How to set: Time Delay
1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Press or to setthe minutes for
Duration.
4. Press .
5. Press or to set the hours for
Duration.
6. Press .
The display shows flashing .
7. Press or to set the End Time
and press . First you set the
minutes and then the hours.
The oven turns on automatically later on,
works for the set Durationand stops at
the set End Time. When the set time
ends, the signal sounds for 2 minutes.
The display shows flashing
and the
time setting . The oven turns off
automatically.
8. Press a sensor field to stop the
signal.
9. Turn off the oven.
When the Time Delay
function is turned on, the
display shows a symbol of
the heating function,
with a dot and
. The dot
shows which clock function
is on in the Clock / residual
heat display.
7.6 How to set: Minute Minder
1. Press .
The display shows flashing and "00".
2. Press to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Press or to set the Minute
Minder and to confirm.
4. Press or the Minute Minder starts
automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes and the display
shows flashing 00:00 and .
5. Press a sensor field to stop the
signal.
7.7 How to set: Count Up Timer
1. To reset the Count Up Timer press:
and at the same time .
ENGLISH 13