0409
1
6
01103040
Page
Notice
Date
OPERATING
HANDBOOK
6. Maintenance
CAREFUL
SHUT OFF THE POWER SUPPLY OF THE MACHINE BEFORE ANY MAINTENANCE OR
REPAIR INTERVENTION IS CARRIED OUT AND MAKE SURE THAT THE CYLINDER IS
COLD.
DAILY (8 h)
1.
Check that the fi nger protection is working.
WEEKLY (40 h)
2.
Clean the fan grates of motors.
3.
Clean the stripper fi ngers and the thermostat attachment.
4.
Clean the ironer external, from dust.
G.
Clean the fl uff fi lter with suction device.
G.
Clean the cover fi lter with suction device.
MONTHLY (170 h)
5.
Check that the parting strips are intact and replace if necessary.
EVERY SIX MONTH (1000 h)
6.
Slightly grease the chains (see lubrication table in the handbook).
7.
Clean and check the support rollers of the cylinder.
8.
Check that the crank is working.
9.
Check that the electrical connections are shut off on the supply terminal.
10.
Clean the whole suction device.
11.
Check the heating elements, wires and connections (only for electric heated machi-
nes).
12.
Clean the gas fi lters (only for gas heated machines).
13.
Check the condition and tension of the ironing strips and of the clips.
14.
Check the feeding bands, their drive and the clamps.
15.
Check that the thermostat is working.
16.
Clean the ironer internal, from dust.
Preventive maintenance
