Electrolux GA55GL201, User Manual

Page: 42 / 52

42 electrolux installation
Water inlet hose with safety valve
After connecting the double-walled
water inlet hose, the safety valve is
next to the tap. Therefore the water
inlet hose is only under pressure
while the water is running. If the water
inlet hose starts to leak during this
operation, the safety valve cuts off the
running water.
Please take care when installing the
water inlet hose:
●
The electrical cable for the safety
valve is in the double-walled water
inlet hose. Do not immerse the
water inlet hose or the safety valve
in water.
●
If water inlet hose or the safety
valve is damaged, remove the
mains plug immediately.
●
A water inlet hose with safety valve
must only be replaced by the
Service Force Centre.
Warning!
Dangerous voltage
Water outlet hose connection
The drain hose can face either to the
right or left of the dishwasher
Ensure the hose is not bent or
squashed as this could prevent or
slow down the discharge of water.
The sink plug must not be in place
when the machine is draining as this
could cause the water to syphon back
into the machine.
The waste connection must be at a
maximum height of 70 cm from the
ground.
N 762+3
105
N 600 G 570
20
G 759
70
100 180
550
G 546
N 550 50
400
max. 700
600
D D
W K E
A
C C
B B
A = drain outlet
G = size of the appliance
K = cold water supply
N = size of the recess
W = hot water supply
E = socket
117986 11/1en 16-06-2007 9:30 Pagina 42