manualshive.com logo in svg

Electrolux GA55GL201, User Manual

Share
Download
Electrolux GA55GL201 User Manual Download Page 34

34 electrolux something not working

Something not working

The dishwasher will not start or stops during operation. 
Certain problems are due to the lack of simple maintenance or oversights,
which can be solved with the help of the indications described in the chart,
without calling out an engineer.
Switch off the appliance and carry out the following suggested corrective
actions.

Fault code and malfunction

Possible cause and solution

●

appears in the digital display

●

intermittent audible signal is active

The dishwasher does not fill with water

●

The water tap is blocked or furred with
limescale. 
Clean the water tap.

●

The water inlet hose has not been
correctly laid or it is bent or squashed. 
Check the water drain hose connection.

●

The filter (where present) in the threaded
hose fitting at the water inlet valve is
blocked. 
Clean the filter in the threaded hose.

●

The water tap is turned off. 
Turn the water tap on.

●

appears in the digital display

●

intermittent audible signal is active

The dishwasher will not drain

●

The sink spigot is blocked. 
Clean out the sink spigot.

●

The water drain hose has not been
correctly laid or it is bent or squashed. 
Check the water drain hose connection.

●

appears in the digital display

●

intermittent audible signal is active

Anti-flood device is activated

●

Close the water tap and contact your
local Service Force Centre.

117986 11/1en  16-06-2007  9:30  Pagina 34

Summary of Contents for GA55GL201





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands