36
Removing the Cold Control and Fan
Housing Cover:
1.
Using a small common screwdriver, open the (2)
screw covers, one on each side.
2.
Remove the (2) Philips head screws holding the
housing to the evaporator cover and slide the
housing forward to remove.
Removing the Cold Control:
1.
Disconnect power from the freezer and remove the
cold control and fan housing cover.
2.
Disengage the two wire tips from the holes in the
right side of the food liner.
3.
To lift up on the end of the rack to disengage the
wire tip’s from the bottom of the evaporator cover
and pull out.
Removing the Cold Control Knob:
1.
Using a small common screwdriver, pop the knob
off the shaft.
