manualshive.com logo in svg

Electrolux FPUH17D7KF All Freezer Professional Series, Servicing

Share
Download
Electrolux FPUH17D7KF All Freezer Professional Series Servicing Download Page 80

  Section 7 Troubleshooting

7-2

Modern Freezers have increased storage 
capacity and more stable temperatures. 
They require heavy duty compressors.

Freezer/refrigerator operates at higher 
pressures during the start of the ON cycle.

Metal parts undergo expansion and 
contraction, as in hot water pipes.

Refrigerant used to cool the unit is 
circulating throughout system.

Freezer/refrigerator is not level. It rocks on 
the floor when it is moved slightly.

Floor is uneven or weak.

Freezer/refrigerator is touching the wall.

Weather is hot and humid, which 
increases internal rate of frost build-up.

Door is slightly open.

Door is opened too frequently or kept open 
too long.

Interior needs to be cleaned.

Foods with strong odors are in the Freezer.

Freezer/refrigerator is not level. It rocks on 
the floor when it is moved slightly.

Floor is uneven or weak.

The fluorescent lamp or light bulb is 
burned out.

No electric current is reaching the freezer/
refrigerator.

Ice maker is not working

Louder sound levels 
whenever Freezer/
refrigerator is on.
Louder sound levels when 
compressor comes on.

Popping or cracking sound 
when compressor comes 
on.

Bubbling or gurgling 
sound.

Vibrating or rattling noise.

Moisture forms on inside 
Freezer/refrigerator walls.

Odors in Freezer/
refrigerator.

Door will not close.

Light bulb is not on.

Automatic ice maker not
working. (Some freezer 
models)

This is normal. When the surrounding noise level is 
low, you might hear the compressor running while it 
cools the interior.

This is normal. Sound will level off or disappear as 
freezer/refrigerator continues to run.

This is normal. Sound will level off or disappear as 
freezer/refrigerator continues to run.

This is normal.

Level the freezer/refrigerator.

Ensure floor can adequately support unit. Level the 
unit by putting wood or metal shims under part of 
the unit

Re-level freezer/refrigerator or move slightly.

This is normal.

See Problem section “Door will not close”.

Open the door less often.

Clean interior with sponge, warm water, and 
baking soda. Replace air filter.

Cover the food tightly.

This condition can force the cabinet out of square 
and misalign the door. Level unit.

Ensure floor can adequately support unit. Level the 
unit by putting wood or metal shims under part of 
the unit.

Replace lamp or light bulb.

See Problem section “Freezer/refrigerator 
compressor does not run” on previous page.

1.   Ensure the wire signal arm is not in the UP      

position.

2.   Water supply is turned off.
3.   Water pressure is too low.
4.   The freezer is not cold enough.

Problem

Correction

Cause

Summary of Contents for FPUH17D7KF All Freezer Professional Series





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands