background image

3

ENGLISH

CUSTOMER CARE AND SERVICE

We recommend the use of original spare parts. 
When contacting Electrolux Customer Service, ensure that you have the following data 
available. The information can be found on the rating plate. Model, PNC, Serial Number.

Warning / Caution-Safety information.
General information and tips.
Environmental information.

Subject to change without notice.

GB

IE

GREAT BRITAIN & IRELAND - Customer Care and Service

Standard Guarantee Conditions and Exclusions.

To see our guarantee conditions and 

exclusions please visit www.electrolux.co.uk or contact our Customer Care Department.

Service & Spare Parts.

 Please contact your local Service Force Centre on; 08445 616616 

(Your call will automatically be routed to your local centre) For the address of your local 
centre please visit; www.electrolux.co.uk Please ensure you read the information under 
‘What to do if’ in your instruction booklet before contacting us for service.
Servicing and/ or installation of your product, including electrical connections and water 
connections should be carried out by a suitably qualified engineer. In the user manual and 
on our web site, www.electrolux.co.uk you will find some useful information on how to 
deal with minor faults and how to take care of your product. When contacting us for 
Service please ensure that you have your purchase receipt and the following information 
available:

Model No...............................................           Serial No..................................................
Product No............................................           Purchase Date:.........................................

Republic of Ireland:

 For Customer Care or Service please contact us at the following 

address, Electrolux Group(Ir) Ltd, Long Mile Rd, Dublin 12, Republic of Ireland. 
Tel No. +353 (0) 1 4090751, E mail; [email protected] 

Electrolux : 08445 613613

Customer Care.

 Please contact Electrolux Major Appliances, Addington Way, Luton, 

Bedfordshire, LU4 9QQ. 

Summary of Contents for EYL10566WE


























Reviews: