c. Assemble the soap tay on the soap tray
holder.
d. Place the sliding rail between the holders
and fix the sliding rail by fixing the lower
holder as Fig. 13 shown.
b. Assemble the soap tray holder from the
bottom of the sliding rail as Fig. 12 shown.
Point the open
gap upward
The larger hole should
be pointed outside
Fig. 13
Fig. 12
6.
OPERATION INSTRUCTION
Water flow controler
The water flow knob is used to
increase/decrease the water flow.
- Clockwise rotate, decrease water
flow.
- Anti-clockwise rotate, increase water
flow.
On/off button
Control the shower unit's electricity
and working start/stop, when push on,
water flowe out, when push off, water
stops.
NOTE:
When you press the On/off button
to start the unit water start to flow out from
the showerhead. To avoid too hot or too
cold water flow, do not let showerhead
point directly to human body.
6.1
Product features
3
4
2
3
1
4
2
Water temperature adjuster
This section is used to select the
desired water temperature. The water
temperature can be adjusted within the
range of 30 C to 46 C.
1
Water temperature indicator
This indicator indicate the setting water
temperature and error code. For the
error code please refer to helpful hints
and tips section (page 21).
17
ENGLISH
When rotate the water temperature
adjuster anti-clockwise to the minimum
position “ ”, the shower will stop heating
and the temperature indicator will indicate
the actual temperature.
