Electrolux EXS09JEIW, User Manual

Page: 9 / 80

9 ENGLISH
4.2 Location of the Remote Control
Fig.01
Max. 8m
t Keep the remote control where its
signal can reach the receiver of the
indoor unit (a maximum distance of
8 m is allowed).
t
When you select the timer operation,
the remote control automatically
transmits a signal to the indoor unit at
the speci ed time.
t If you keep the remote control in a
position that hinders proper signal
transmission, a time lag of up to
15 minutes may occur.
t
When the remote control sends out
a signal, the symbol will blink
for about 1 second on the display.
The indoor unit will acknowledge the
signal with a beep when it receives an
effective signal.
4.1 How to use the Remote
control
1. Keep the remote control where its
signal can reach the receiver of the
indoor unit.
2. When operate the air conditioner, make
sure the remote control is pointing to
the signal receiver of the indoor unit.
3. When the remote control sends out
a signal, the symbol
will blink for
about 1 second on the display of the
remote control.
4. The indoor unit will acknowledge the
signal with a beep when it receives the
signal from the remote control.
5. Please press the button of the remote
control and resend the signal if you did
not hear a beep from the indoor unit.
t
The air conditioner will not
operate if curtains, doors or other
materials block the signals from
the remote control to the indoor
unit.
t Prevent any liquid from falling
into the remote control. Do not
expose the remote control to
direct sunlight or heat.
t
If the infrared signal receiver on
the indoor unit is exposed to
direct sunlight, the air conditioner
may not function properly. Use
curtains to prevent the sunlight
from falling on the receiver.
t If other electrical appliances react
to the remote control, either move
these appliances or consult your
local dealer.
4. REMOTE CONTROL