Electrolux EXS09JEIW, User Manual

Page: 16 / 80

16 www.electrolux.com
Horizontal/swing and Vertical/swing button function
TEMP
AUTO
COOL
DRY
HEAT FAN
HIGH
LOW
MODE
FAN SPEED
VERTICAL/
SWING
TIMER ON
SLEEP
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME
TURBO
HORIZONTAL/
SWING
MED
A
1. When press the button ( A ) once and
quickly, the air flow direction setting
feature of the louver is activated. The
moving angle of the louver is 6º for
each press.Keep pressing the button to
move the louver to the desired position.
2. If press the button without releasing
for 2 more seconds, the auto swing
feature of the louver is activated. The
horizontal/vertical louver would swing
(up/down or left/right) automatically.
Press it again to stop.
When the louver swing or move
to a position which would affect
the cooling and heating effect
of the air conditioner, it would
automatically change the swing/
moving direction.
Timer Operation
TEMP
AUTO
COOL
DRY
HEAT FAN
HIGH
LOW
MODE
FAN SPEED
VERTICAL/
SWING
TIMER ON
SLEEP
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME
TURBO
HORIZONTAL/
SWING
MED
A
B
Press the TIMER ON button ( A ) can set
the auto-on time of the unit. And press the
TIMER OFF button (
B ) can set the auto-off
time of the unit.
To set the Auto-on time.
1. Press the TIMER ON button. The
remote controller shows TIMER ON,
the last Auto-on setting time and
the signal “h” will be shown on the
LCD display area. Now it is ready to
reset the Auto-on time to START the
operation.
2. Push the TIMER ON button again to set
desired Auto-on time. Each time you
press the button, the time increases in
30 minutes increments, up to 10 hours,
then at 1 hour increments up to
24 hours.
3. After setting the TIMER ON, there will
be a one-half second delay before
the remote controller transmits the
signal to the air conditioner. Then, after
approximately another 2 seconds, the
signal “h” will disappear and the set
temperature will re-appear on the LCD
display window.