Electrolux EXH09HX, Installation Manual

Page: 13 / 68

1
2
3
A
B
C
Power supply cable Power supply
A Blue Neutral
B Brown Live
C Green/yellow-striped Ground
• The appliance shall be installed in accord-
ance with national wiring regulations.
Wrong connection can cause overheating
or fire.
• Fit a disconnect switch, having a contact
separation of at least 3mm in all poles, to
the electricity power line.
Earth leakage breaker
• Provide an earth leakage breaker in order
to protect against electric shock in case of
leak.
• Use the current-activated, high-sensitivity,
high-speed type breaker with a rated sen-
sitivity current of below 30 mA and an
operating time of below 0.1 second.
Hanging the remote control
1. Fit the special screw to the wall with the
wall plug.
2. Hang the remote control to the screw
head.
2 6
1
1 Remote control rear side
Loading the batteries
Slide the cover in the direction of the arrow.
1. Open the cover.
2. Insert the batteries.
3. Close the cover.
– If after battery replacement the control
fails to function, take out the batteries.
Wait for more than 30 seconds and put
them in again.
Test run
1. Open the open panel to see the control
section.
2. Start the operation with the remote con-
trol.
3. Press the “AUX” button on the unit for 5
seconds or more.
electrolux 13