Electrolux EWW 1291 Instruction Booklet Download Page 19

Page: 19 / 29

ENGLISH

9. Select the DELAY TIME

Before you start the programme

, if you wish the

starting to be delayed, press the DELAY button

repeatedly, or keep it pressed, to select the desired

delay.

The selected delay time value (up to 23 hours) will

appear on the display for 3 seconds, then the

duration of the programme will appear again.

10. Start the programme

Press the START/PAUSE button. The relevant light

will stop flashing, the DOOR pilot light will light up,

and only the light relevant to the phase that is in

progress will remain lit.
If you have chosen a delayed start, the washing

machine will begin the countdown.
The display will show the duration of the programme

or the selected delay.

START/PAUSE

DELAY

START

6. Select the temperature

Press the TEMPERATURE button if you wish to

select a temperature value different from the one

proposed by the machine or the COLD WASH. The

relevant light will light up.

7. Select the spin speed or NO SPIN

option

Press the SPIN SPEED button repeatedly, in order

to select the desired spin speed or the NO SPIN

option. The relevant light will light up.

8. Select the desired options

If you select the RINSE HOLD or NIGHT CYCLE

option, the machine will stop at the end of the

programme with the water still in the tub.
If your laundry is only slightly soiled, select the

QUICK option.

The relevant light illuminates.

NIGHT CYCLE

QUICK

RINSE HOLD

OPTIONS

1200

900

700

500

NO SPIN

SPIN SPEED

°C

COLD

TEMPERATURE

132984360.qxd 06/09/2006 14.47 Pagina 19

Summary of Contents for EWW 1291






























Search results

Summary of Contents for EWW 1291

Reviews:

Related manuals for EWW 1291

Brands by name

Popular brands

Electrolux EWW 1291, Instruction Booklet

Search results

Summary of Contents for EWW 1291

Reviews:

Related manuals for EWW 1291

Brands by name

Popular brands