Electrolux EWW 1291, Instruction Booklet

Page: 12 / 29

• Duration of washing programme in hours and
minutes, after you have selected a programme.
While the programme is running (after you have
pressed the START/PAUSE button), the displayed
time value decreases by one unit every minute.
• The selected drying time is displayed in minutes
or hours and minutes (max 150 mins).
After the programme has started the remaining
time is updated every minute.
• The machine has completed the programme: this is
indicated by a blinking zero. At the same time, the
door phase pilot light goes out. The zero will
reappear when you switch the washing machine
on, unless the previous programme has been
erased by means of the SKIP RESET button.
Important!
The first time you use the machine, when you switch
it on, it may display a blinking zero and give an
audible warning signal. This is due to the fact that
the machine has performed a washing cycle during
the manufacturer’s inspection tests, and this cycle
has not been erased after its completion.
• Delay start, a time value indicated in hours and
selected by means of the relevant button.
0
1.25
2.05
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the START/PAUSE button,
the countdown begins, and the delay time value
decreases by one unit every hour, and then, when
remain the last 2 hours each 30 minutes.
You can delay the start of the selected programme
by up to 23 hours in one hour intervals.
• An incorrect option selection has been made:
this is indicated by the message Err when a function
incompatible with the current programme is selected.
The incorrect selection is also indicated by an
audible warning signal.
• An alarm code indicates a fault in the machine
operation (see the relevant chapteron page 27).
E20
12
132984360.qxd 06/09/2006 14.47 Pagina 12