ENGLISH
6 OPTIONS button
Press this button to select one of these following
options:
• NIGHT CYCLE button: when you choose this
option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.
As all spinning phases are suppressed, this
washing cycle is very quiet and it can be useful at
night or in times with a more economical power
rate.
On cotton and synthetic programmes the rinses will
be performed with more water.
At the end of the cycle, the light corresponding to
NIGHT CYCLE option and the pilot light END are
on and the START/PAUSE button light and the
DOOR
pilot light are out, to indicate that the water
must be drained. A blinking zero appears on the
display.
To complete the cycle, press RESET button once, all
the leds are off, the display will show three flashing
dashes, then press FABRIC button in order to select
the desired programme. If you wish to drain or spin
press the RESET button until the led of the desired
function illuminates.
You can change the spin speed by means of button
5 and then depress START/PAUSE button.
Important!
If you accidentally press the RESET
button more than once, the display will show three
blinking dashes
. To cause the washing machine to
drain the water, select any washing programme by
means of the FABRICS button, then press RESET
three times
in order to select the DRAIN position
(only the DRAIN light will remain lit), then press
again the START/PAUSE button.
•
QUICK button
: this button allows you to select the
EXTRA QUICK function, for laundry that is only
slightly soiled (not for WOOL/HAND WASH and
SILK programme).
The washing time will be reduced according to the
type of fabric and the selected temperature.
•
RINSE HOLD button:
when you choose this
option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.
At the end of the cycle, the light corresponding to
RINSE HOLD option and the pilot light END are on
and the START/PAUSE button light and the DOOR
pilot light are out, to indicate that the water must be
drained. A blinking zero appears on the display.
To complete the cycle, press RESET button once, all
the leds are off, the display will show three flashing
dashes, then press FABRIC button in order to select
the desired programme. If you wish to drain or spin
press the RESET button until the led of the desired
function illuminates.
You can change the spin speed by means of button
5 and then depress START/PAUSE button.
7 Electronic Drying button
By means of this button you can choose the required
degree of drying for cottons and synthetics:
Extra dry (cottons).
Store dry (cottons and synthetics).
The corresponding pilot light illuminates.
The drying time is automatically adjusted by the
machine: the laundry will be dried to the selected
degree of dryness.
8 Drying Time button
By depressing this button you can select a timed
programme for cotton or synthetics, the relevant light
illuminates. To select “cottons” you have to push the
button for about 2 seconds. To select the drying time
push the button until the time you want appears in
the display according to the fabrics (cotton or
synthetics) you have to dry.
- For COTTON and SYNTHETICS you can select a
drying time from 10 minutes to 150 minutes (2.30).
Every time you press the button the time increases,
by 5 mins.
9 DISPLAY
The following pieces of information are shown on the
display:
• Three blinking dashes, when a programme is
cancelled by means of the SKIP/RESET button.
The three blinking dashes will also appear when you
press the ON/OFF button to switch the machine on,
if the previously selected cycle has been erased.
---
11
132984360.qxd 06/09/2006 14.47 Pagina 11
Summary of Contents for EWW 1291
Page 1: ......
Page 29: ...MADE IN ITALY ...
