Electrolux EWT806, User Manual

Page: 17 / 33

Choosing your own wash program settings
• Settings can be changed at any time, even when a
wash is in progress or when the machine is paused.
When running there will be a short delay of 2 seconds
before a change to settings takes effect. This is to allow
you time to complete your desired changes.
• If you make a change to settings during a wash, the
progress of the wash may not continue exactly from
where it was in the program before the change.
• When you try to make a change to settings and the
selection you make is unavailable at the time, you will
hear a long ‘error beep’.
Program button
Press the Program button until the light
indicates the program you want to use.
Each press of the Program button changes
the wash program to the next program.
When you choose the Wool program, the
Deep rinse option is automatically selected
for you. You cannot select Eco rinse with
the Wool wash program.
Starting your washing machine
1. Turn on the taps
2. Close the lid
3. Press the Power button
The machine will ‘beep” twice, briefly display a number in
the digital display and then it is ready for you to select the
wash program settings.
Please wait for this to happen before attempting to operate
the machine.
If the displayed settings are what you want to use then
press Start/Pause to start the wash program.
To select a different program or change other settings, read
the following instructions.
NOTE: On powering up the machine, and also after a wash
has finished in preparation for the next wash, the water level
defaults to auto sensing and rinse defaults to Eco. (If your
last wash was a Drip dry / Deep rinse program, then rinse
will stay at deep).
Power button
Wash program
(Program button)
Recommended
dirt level
Recommended
temp. wash water
Using the program
Intensive
*(includes 6 minute soak)
Heavy Hot or Warm Select this program for a heavily soiled cotton wash
load.
Normal/Heavy
Medium Hot or Warm Select this program for a full load of normally soiled
cottons.
Normal Medium Hot, Warm or Cold Select this program for an average domestic load of
mixed fabrics.
Wool Medium or Light Warm Select this program for woollen clothes. Only wash
woollens labelled ‘machine washable’.
Delicate Light Warm Select this program for lingerie, lace trimmed and
embroidered items.
* Intensive has a built-in 6 minute soak period at the start of the wash program. Any soak period you have selected will be added to the 6 minutes. (See
information at “Soak option” on page 21)
Wash program guide
Dirt Level button
There are 3 dirt levels to choose from:
•
Heavy for heavily soiled clothes eg. very dirty
work clothes and overalls
• Medium for everyday soiled items eg family
clothes, sheets etc
• Light for lightly soiled clothes, just to freshen
them up
The Dirt Level lets you have an influence on the wash time
of the selected program.
Press the Dirt Level button if you want to increase or
decrease the wash time.
For the same wash program, Heavy will have a longer wash
time than Medium, and Medium a longer wash time than Light.
Water Level button
Pressing the Water Level button allows you
to choose the water level to be used for your
wash.
You can select:
•
auto sensing
or a manual water level
• High
• Medium
• Low
Auto sensing is the default selection for each wash to help
you save water.
electrolux water aid washing machine operating your washing machine 17
PLEASE READ BEFORE USING HOT & WARM WATER WASH
Hot and Warm wash are provided wash option which could work only hot water inlet is connected and supplied
properly at ‘H’ position at the back of the machine. Selecting those hot or warm wash without hot water, machine
would not work.
REMARK: Hot water installation must be prepared properly by extra installation from technical and is not a part of installation
and warranty.