Electrolux EWT806, User Manual

Page: 14 / 33

One bar l on screen is low spin speed.
Two bars ll on screen is medium spin
speed.
Three bars lll on screen is high spin
speed.
Actual spin speeds will vary with, and be
appropriate to, the Fabric selection.
The fourth selection you can make is DRIP DRY. (No spin)
NOTE: Select a Deep rinse option for a drip dry wash. You
cannot select DRIP DRY when either Eco rinse or FastEco
rinse option is selected.
Drip dry wash information
Drip dry clothes, clothes that need to
be taken out of the washing machine
dripping wet, do not require a spin cycle
after deep rinse.
At the end of the drip-dry normal rinse,
the washing machine will stop. In the left
hand screen you will be prompted to remove the drip dry
clothes from the washbowl.
Open the lid and remove the drip dry clothes.
To drain the remaining water from the washing machine,
simply close the lid.
Progress of your wash program
Once you have started your wash by pressing Start/Pause,
you can see what your machine is doing and where it is in
the wash program by looking at the screen displays.
Animations are shown on the left hand screen representing
the stage in the wash. You will see animations representing
stages eg. fill, wash, rinse, spin, etc as shown below.
In addition, on the right hand screen each stage is highlighted
as it takes place during the progress of your wash.
If you wish to advance to the next stage of the wash
program eg. stop the wash agitation stage and go to rinse
and spin, press the Fabric button and select RINSE&SPIN
program.
Lid locked
The message ‘SAFETY Lid is
locked’ will appear in the right
hand display screen to advise
you when the lid of the washing
machine is locked in the closed
position.
The lid will be automatically locked when the washbowl is
spinning during a wash program.
To fill and agitate, the lid must be closed, but will not be
automatically locked.
If the lid is open and the machine is waiting for it to be
closed for the wash program to continue, you will get a
message on the screen telling you to close the lid.
Should you need to access the washbowl during spin,
press Start/Pause. You will have to wait a short time for
the bowl to stop spinning before the lid unlocks and the
‘SAFETY Lid is locked’ message disappears.
If then you open and close the lid, and the machine is still in
a spin stage of the wash program, the lid will lock and the
machine will continue to complete the spin stage.
warning
• DO NOT insert anything into the lid lock slot in the
top panel of the washing machine.
• DO NOT interfere with the lid lock mechanism to try
and disable it or otherwise change the way it works.
• DO NOT try to force open the lid when it is locked.
User help menu
Entering the User Help menu
Press the Stain Guide button to enter the User Help menu.
You can do this at any time, even when it is running a wash
program.
How to SELECT and use User Help menu items
When you enter the User Help menu, the left hand screen of
the User Help menu appears.
Existing buttons close by the screen take on a new role.
In User Help menu only, the new function of these buttons
is as follows as indicated on-screen.
• Press Stain Guide button to EXIT the User Help menu.
(Stain Guide is to left of on-screen EXIT)
• Press Fabric button to move to next User Help menu
item. (Fabric is beneath on-screen arrow )
Selected menu item is highlighted. Information relating to
item is shown in the right hand display screen.
• Press Dirt Level button to enter the sub-menu for the
highlighted User Help menu item ie. select. (Dirt Level is
beneath on-screen SELECT)
14 operating your washing machine
electrolux water aid washing machine
Operating your washing machine
Model: EWT959