use
electrolux
35
The selector dial can be turned either
clockwise or anticlockwise. Position
O
to
Reset programme/ Switching OFF of the
machine.
At the end of the programme the
selector dial must be turned to
position O, to switch the machine
off.
Attention!
If you turn the programme selector dial
to another programme when the
machine is working, the red Start/Pause
pilot light will flash 3 times to indicate a
wrong selection. The machine will not
perform the new selected programme.
Programme Option buttons
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before depressing the
Start/Pause button.
When these buttons are pressed, the
corresponding pilot lights come on.
When they are pressed again, the pilot
lights go out.
Select the spin speed or No Spin or
Rinse Hold option
Press the Spin button
repeatedly to change the
spin speed, if you want
your laundry to be spun at
a speed different from the
one proposed by the
washing machine.
The relevant light will light up.
Maximum speeds are:
• for cotton: 1000 rpm;
• for synthetics, handwash: 900 rpm;
• for delicate fabrics: 700 rpm.
Night Cycle
:
by selecting this
option, the machine will not drain the
water of the last rinse, so as not to
wrinkle the laundry.
As all spinning phases are suppressed,
this washing cycle is very noiseless and it
can be selectionned at night or in times
with a more economical power rate.
On cotton, synthetic, delicates and silk
programmes the rinses will be
performed with more water.
When the programme has finished, the
display shows a 0.00 flashing, the pilot
light (Door) is on, the Start/Pause light
is off and the door is locked to indicate
that the water must be emptied out.
Rinse Hold
:
by selecting this option
the water of the last rinse is not emptied
out to prevent the fabrics from creasing.
When the programme has finished the
pilot light
(Door) is on, the
Start/Pause light is off and the door is
blocked to indicate that the water must
be emptied out.
To empty out the water:
turn the programme selector dial to “
O
”
select the
(Drain),
(Spin) programme
reduce the spin speed if needed, by
means of the relevant button
depress Start/Pause button
Select the Start/Pause
To start the selected programme, press
the
“Start/Pause”
button; the green
pilot light stops flashing.
The
“door”
light is on to indicate
that the appliance starts operating and
the door is locked.
To interrupt a programme which is
126.2931.33:- 17/03/10 9:48 Página 35
