background image

4

Installation

• All internal packing must be removed before using

the appliance. Serious damage may be caused to
the machine or adjacent furniture if the protective
transit devices are not removed or are not
completely removed. Refer to the relevant
paragraph in the instruction book.

• Any electrical work required to install this appliance

must be carried out by a qualified electrician.

• Any plumbing work required to install this

appliance must be carried out by a qualified
plumber.

• After having installed the machine, check that it is

not standing on its electrical supply cable.

• If the appliance is placed on a carpeted floor,

ensure that air can circulate freely between the feet
and the floor.

Use

• This appliance is designed for domestic use. It

must not be used for purposes other than those for
which it was designed.

• Only wash fabrics which are designed to be

machine washed. Follow the instructions on each
garment label.

• Do not overload the appliance. Follow the

instructions in the instruction book.

• Make sure that all pockets are empty. Objects such

as coins, safety pins, pins and screws can cause
extensive damage.

• Do not machine wash garments saturated with

petroleum, methylated spirits, trichlorethylene, etc.
If such fluids have been used to remove stains
prior to washing, wait until they have completely
evaporated from the fabric before placing garments
in the appliance.

• Place small items such as socks, belts, etc. in a

cloth bag or pillowcase to prevent them getting
trapped between the drum and the tub.

• Use only the recommended quantities of fabric

softener. An excessive amount could damage the
laundry.

Warnings

• Leave the porthole door slightly ajar when the

appliance is not in use. This preserves the door
seal and prevents the formation of musty smells.

• Always check that water has emptied out before

opening the door. If not, drain the water following
the instructions in the instruction book.

• Always unplug the appliance and shut the water

tap after use.

General safety

• Repairs to the machine must be carried out only by

qualified personnel. Repairs carried out by
inexperienced persons could cause serious
danger. Contact your local Service Centre.

• Never pull the power supply cable to remove the

plug from the socket; always take hold of the plug
itself.

• During high temperature wash programmes the

door glass may get hot. Do not touch it!

The following warnings are provided in the interests of overall safety. You must read them carefully before
installing or using the appliance.

132991020-EWF1010/1210•GB  21/07/03  09:31  Pagina 4

Summary of Contents for EWF 1010
























Reviews: