ENGLISH
5 “Start/Pause” button
After having selected the programme and the
required options press this button to start the
machine. The corresponding pilot light stops
flashing and remains lit.
To interrupt a programme which is running, depress
the Start/Pause button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it
was interrupted, press the START/PAUSE button
again.
6 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on.
●
/
: when this light comes on this means
that the machine is performing the washing
phase. If you have selected the “Prewash”
function, this light will be on during the prewash
phase too.
●
= rinses
●
= spin
●
= end of programme
●
= door
At the end of the programme the
pilot light
illuminates.
The
pilot light also flashes in the event of
operating problems:
- 4 flashes = the door has not been closed
- 2 flashes = the machine does not empty
- 1 flash = the machine does not fill
To eliminate the problem, see paragraph
“Something not working”.
The “door” pilot light indicates if the door can be
opened:
- light on: the door cannot be opened
- light off: the door can be opened
It stays on during the whole programme indicating
that the door is locked.
When the light goes out, the door can be opened
(see page 17).
7 Spin speed selector dial
This dial allows you to reduce the final and the
intermediate spin speeds or to select the NO SPIN
or RINSE HOLD
option.
The speeds on the dial refer to cotton programmes.
Position 1000 (or 1200) corresponds to
900 r.p.m. for synthetics and wool and 700 r.p.m. for
delicates.
Position 500 corresponds to 450 r.p.m. for delicates
and 500 r.p.m. for synthetics and wool.
●
NO SPIN
: by selecting this option all the
spinning phases are suppressed. To be used for
extremely delicate items.
The machine will add 3 rinses on cotton
programmes and 1 rinse on synthetic
programme.
●
RINSE HOLD
: by selecting this option
the water of the last rinse is not emptied out
to prevent the fabrics from creasing. When
the programme has finished the phase light
END
and the door
light are on to
indicate that the water must be emptied out.
To do this:
●
turn the programme selector dial to “O”
●
select the drain
or spin
programme.
Using the spin speed selector dial you can
choose the desired spin. If the dial remains on
position
or
the machine will perform the
spin speed at 400 rpm.
●
depress START button.
11
132991020-EWF1010/1210•GB 21/07/03 09:31 Pagina 11
