![Electrolux EW6F528S Manual Download Page 15](http://html.mh-extra.com/html/electrolux/ew6f528s/ew6f528s_manual_100027015.webp)
The washing programme continues.
To start the programme again make sure that the
programme dial is correctly positioned on the interrupted
programme and the indicator of the Start/Pause button
is flashing.
12.10 Cancelling a running
programme
1. Press the button On/Off to cancel the programme and to
deactivate the appliance.
2. Press the button On/Off again to activate the appliance.
If the SensiCare System has completed and the water
filling has already started, the new programme starts
without repeating the SensiCare System
.
The water and the detergent are not drained out in order to
avoid waste.
There is also an alternative way of cancelling:
1. Rotate the selector knob to the "Reset” position
.
2. Wait for 1 second. The display shows
.
Now, you can set a new washing programme.
12.11 Opening the door - Adding
garments
If the temperature and level of the water in the
drum are too high and/or the drum is still rotating you
should not open the door.
While a programme or the delay start operates, the
appliance door is locked. The display shows the indicator
.
1. Touch the Start/Pause button
. Indicator
starts to flash.
2. Wait until door lock indicator
stops flashing and
goes off.
Open the appliance door. If necessary, add or remove the
items. Close the door and touch the Start/Pause button
.
The programme or the delay start continues.
12.12 End of the programme
When the programme has finished, the appliance stops
automatically. The acoustic signals operate (if they are
active).
The display shows
.
The indicator of the Start/Pause button
goes off.
The door unlocks and the indicator
goes off.
1. Press the button On/Off to deactivate the appliance.
After five minutes from the end of the programme, the
energy saving function automatically deactivates the
appliance.
When you activate the appliance again, the display
shows the end of the previous programme.
Turn the programme dial to set a new cycle.
2. Remove the laundry from the appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent dispenser slightly ajar
to prevent mildew and odours.
5. Close the water tap.
12.13 Draining water out after end of
cycle
If you have chosen a programme or an option that does not
empty out the water of the last rinse, the programme is
completed, but:
• The time area shows
and the display shows the
door locked
.
• The drum still tur
ns at regular intervals to prevent creases
in the laundry.
• The door stays locked.
• You must drain the water to open the door:
1. If necessary, touch the Spin button
to decrease the
spin speed proposed by the appliance.
2. Press the Start/Pause button
:
• If you have set Rinse Hold
the appliance drains the
water and spins.
• If you have set Night
the appliance only drains the
water
The option indicator Rinse Hold
disappears.
3. When the programme is completed and the door locked
indicator
goes off, you can open the door.
4. Press the On/Off button for a few seconds to deactivate
the appliance.
12.14 Stand-by option
The Stand-by function automatically deactivates the
appliance to reduce the energy consumption when:
• You do not use the appliance for 5 minutes
Press the button On/Off again to activate the appliance.
• 5 minutes after the end of the washing programme
Press the button On/Off again to activate the appliance.
The display shows the end of the last programme.