background image

66

To carry out complete defrosting proceed as follows:

1. Remove any stored food, wrap it in several layers of

newspaper and put it in a cool place.

2. Turn the thermostat control knob 

to the «

»

setting.

3. Leave the door open.

4. Introduce the plastic scraper in the appropriate

seating at the base of the cabinet as shown in the
figure and place a basin underneath to collect the
defrost water (see fig.). 

5. When defrosting is completed dry the interior

thoroughly.
Keep the scraper for future use.

6. Turn the thermostat control to a medium setting

and, after letting the appliance run for at least two
hours in the «fast freeze» mode, replace the
previously removed food into the compartments.

Warning

Never use metal objects for defrosting your

appliance as it may get damaged.
Do not use a mechanical device or any
artificial means to speed up the thawing
process other than those recommended by
the manufacturer.
A temperature increase of the frozen food
shortens its safe storage period.

D068

Periodic cleaning

Never use metal objects for clearing your appliance as
it may get damaged. Clean the inside with warm water
and bicarbonate of soda. Rinse and dry thoroughly.

To guarantee a safe operation of the fridge, once a
year remove the ventilation grille at the base and
clean the air channels with a vacuum cleaner.

Periods of non-operation

When the appliance is not in use for long periods, take
the following precautions:

remove the plug from the wall socket;

remove all food:

defrost and clean the interior and all accessories;

leave the door ajar to allow air to circulate to prevent
unpleasant smells.

Summary of Contents for EUN1270














Reviews: