13
ENGLISH
Advanced Functions Operations
1.
°C/°F switch function
°C/°F can be switched by pressing and
Mode buttons at the same time for 3 seconds.
2.
Turbo function
Press the Turbo button to enable or disable
the turbo function. The Turbo function makes
the unit work extra hard to reach your set
temperature in the shortest time as soon as
possible. When you need fast cool or heat,
you can choose this function.
3.
I Feel function
When you press the I Feel button, the I Feel
function will be activated, the remote controller
works as a remote thermostat, providing an
accurate temperature control and maximum
comfort. The remote controller sends the
temperature information at its location to the
indoor unit. The air conditioner will quit I Feel
operation if no temperature information is
received from the remote controller.
4.
I Clean function
If you press two times, it will cancel the function
immediately.
2
3
4
5
8
6
7
1
9
It was useful both in power on and power off
mode. If send the code when power on, the
unit will run I Clean function after turn off unit.
If send code when power off, the unit will run I
Clean function directly. Display shows “CL”.
Each time you need to press I Clean button to
activate this function.
Press the I clean button to activate the I Clean
feature with display twinkles “CL” 5 times then
turn to original setting, when this function is
activated, firstly the indoor unit operates in
cooling mode with low fan speed for several
minutes. After that the unit turns to heating
operation with low fan speed, which dry the
inside of indoor unit. If cooling only model, it
will operate as fan mode. Finally it turns to
fan-only mode and blows away the rest wet
air in several minutes. The whole process
keeps the internal side of indoor unit dry and
prevents the breeding of bacteria.
