6 www.electrolux.com
3.
INDOOR UNIT DISPLAY
4.
REMOTE CONTROLLER
4.1
How to use the Remote
controller
1.
Keep the remote controller where its
signal can reach the receiver of the
indoor unit.
2.
When operate the air conditioner, make
sure the remote controller is pointing to
the signal receiver of the indoor unit.
3.
When the remote controller sends out
a signal, the symbol will blink in the
display of the remote controller.
4.
The indoor unit will acknowledge the
signal with a beep sound when it
receives the signal from the remote
controller.
5.
Please press the button of the remote
controller and resend the signal if you
did not hear a beep sound from the
indoor unit.
•
The air conditioner will not
operate if curtains, doors or
other materials block the signals
from the remote controller to the
indoor unit.
•
Prevent any liquid from falling
into the remote controller. Do not
expose the remote controller to
direct sunlight or heat.
•
If the infrared signal receiver on
the indoor unit is exposed to
direct sunlight, the air conditioner
may not function properly. Use
curtains to prevent the receiver
being exposed to sunlight.
•
If other electrical appliances react
to the remote controller, either
move these appliances or consult
your local dealer.
Type D
1
2
3
5
4
6
7
Type A
1
On/Off indication lamp
Lights up when the unit is work.
2
Heat mode indication lamp
Lights up when Heat mode is activated.
3
Cool mode indication lamp
Lights up when Cool mode is activated.
4
Temperature indication lamp
•
Displays the setting or room temperature
when the unit is operational.
•
Displays the malfunction code when fault
occurs.
•
Displays the function code when some
function is activated.
6
Dry mode indication lamp
Lights up when Dry mode is activated.
5
Wireless indication lamp
Lights up when Wireless function is activated.
7
Timer indication lamp
Lights up when Timer function is activated.
For Type D models, we do not have
the display in the indoor unit, only with
the lights to show the work status.
4
Type C
4
3 2
1
5
Type B
