background image

22  electrolux.com.au

CONSUMPTION VALUES

Program

Water (l)

Energy (kWh)

Duration (min)

PreWash

4.2

0.02

15

Jetwash 14’

6.6

0.34

14

Quick 30’

10.9

0.74

30

*Eco

12.2

0.65

138

Super 50’

10.7

1.29

50

Daily 60°C

14.9

1.38

99

FlexiWash 60°C

15.4

1.43

113

AutoFlex 

30°C - 50°C

10.6 - 17.7

0.82

79 - 91

AutoFlex 

50°C - 60°C

10.9 - 18.5

1.18

102 - 122

AutoFlex 

60°C - 70°C

12.3 - 24.6

1.3

107 - 179

Caution:

 Values above have been tested according to 

related Standards in laboratory conditions, these values 

may vary due to environment conditions (mains voltage, 

water pressure, water inlet temperature and ambient 

temperatures).
*With this program you have the most efficient use

of water and energy consumption for crockery and 

cutlery for normal soil (This is the standard program 

for Test Institutes).

 CAUTION

The Jetwash 14 minute, Quick 30

 minute and 

Super 

50

 Minute programs do not have a drying 

step.
The values stated above are values that are 

obtained in laboratory environment relative to 

related standards.
These values can change according to the 

product’s usage and environment (mains 

voltage, water pressure, water inlet temperature 

and ambient temperatures).

Off mode and end of cycle mode tests in accordance 

with AS/NZS Standards must be carried out with 

Ecomode brightness level. 

Summary of Contents for ESF6767KXA





































Reviews: