12
1. Check that the baskets have been
loaded correctly and that the spray
arms can rotate freely
2. Turn on the water tap
3. Close the dishwasher door
4. Press the On/Off push button
The On/Off indicator light illuminates.
5. Setting and starting the programme
Press the push button of the programme you wish to
select. (See "Washing programmes" chart for the
number of the programme).
The corresponding indicator light illuminates and the
indicator lights of the phases foreseen for the programme
will illuminate.
The start of the programme will occur automatically about
3 seconds after the last pressure of a push button.
Once the programme has started the phase indicator
lights will turn off except for the phase under way.
6. To interrupt or cancel a washing
programme
Interrupt, change or cancel a washing programme in
progress ONLY if it’s absolutely necessary
To interrupt a washing programme
Attention! Hot steam may escape when the door is
opened. There is risk of scalding. Open the door
carefully.
●
Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the
point in which it was interrupted.
●
pressing the On/Off (in this case all the indicator
lights turn off). Press the On/Off push button again;
the programme will start from the point in which it was
interrupted.
To cancel a washing programme in progress
●
Press simultaneously the function push buttons 2 and
3 for about 2 seconds, all the indicator lights will turn off
(except for the On/Off indicator light) indicating that the
running programme has been cancelled and that the
machine has returned to setting mode.
It is now possible to select and start a new washing
programme.
7. Setting the "delay start"
The setting of the delay start occurs before selecting
the programme.
Setting the "delay start"
●
Press the On/Off push button.
●
Press the "delay start" push button until the indicator
light corresponding to the chosen hours flashes (3, 6 or
9 hours).
●
Press one of the programme selection push buttons
and within 3 seconds select a washing programme.
From the moment that the washing programme has
been set, the delay start will begin with the countdown.
The countdown will decrease with step of 3 hours.
During the countdown, the indicator light of the selected
programme and the indicator light of the number of
hours to the start of the programme will remain
illuminated.
Once the delay start has elapsed the programme will
start automatically, the indicator lights for delay start turn
off and the indicator light of the phase underway
illuminates.
To change the "delay start"
As long as the washing programme has not started, you
can change the number of hours for the delay start by
pressing the "delay start" push button.
To cancel the "delay start"
It is possible to cancel a countdown in progress or before
it starts, simply pressing the delay start push button until
the indicator lights corresponding to the delay start hours
are off.
The washing programme will start immediately.
8. End of the washing programme
The dishwasher will automatically stop.
The end of programme indicator light is illuminated.
Switch off the dishwasher by pressing the On/Off push
button.
Hot steam may escape from the appliance when opening
the door immediately after the end of the programme,
therefore, open the door carefully.
Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should
therefore be allowed to cool down before removing from
the appliance.
Leave the dishes in the dishwasher for approx. 15
minutes, with the door ajar, after the end of programme
so that they dry better and will be cooler.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.
Starting a washing programme
