background image

The control panel

4

Function push buttons:

in addition to the dishwashing

programme selected, the following functions can also be set
with the help of these buttons: 
- water softener setting 

- deactivation/activation of the inflow of rinse aid.

"Delay start" push button:

this option allows the start

of the programme to be delayed by 3, 6 or 9 hours.

Function push button “3 IN 1”: 

this appliance is

equipped with the option “3 IN 1”, that allows the use of the "3
IN 1" combi detergent tablets.

This function can be selected with all washing programmes.

With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.

Once selected this option (push button indicator light
illuminated ) it will remain active also for the following washing
programmes, to deactivate the function, press the push button
(push button indicator light off).

Indicator lights:

have the following meanings:

The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary. 

Phase indicator lights:

have the following meanings:

As soon as you select a washing programme, the phase
indicator lights for that programme will illuminate.

As the programme starts, the phase indicator lights turn off
except for the indicator light of the phase in progress.

On/Off push button

Delay start

push button

Indicator lights

Programme selection

push buttons

1

2

3

Function

push buttons

Door handle

3 IN 1

push button

salt refilling indicator light, illuminates when the salt 
has run out

rinse aid refilling indicator light, illuminates when 
the rinse aid has run out

washing: illuminates when the washing phase is 
running

drying: illuminates when the drying phase is 
running

end of programme: illuminates when the washing 
programme has ended

it also has added functions of visual signalling as:

- something not working with the machine

- deactivation/reactivation of the inflow of rinse aid 
- the set of the water softener

Summary of Contents for ESF6122





















Reviews: