19
Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing
programmes" chart).
Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and
rinse aid respectively and using the test programme (see "Washing programmes" chart).
Hints for test centres
Load:
12 standard place settings
Rinse aid setting
Rinse aid dispenser (type A):
position 4 (Type III)
Rinse aid dispenser (type B):
position 5 (Type III)
Detergent dosage :
5 g + 25 g (Type B)
Arrangement lower basket
Arrangement upper basket
Arrangement cutlery basket
Arrangement cutlery basket
Dimensions
Width
60 cm
Height with worktop
85 cm
Height without worktop
82 cm
Max depth
63.5 cm
Max depth with open door
118.5 cm
Electrical connection:
Information on the electrical connection is given on the rating plate on the
Voltage
inner edge of the dishwasher’s door.
Overall power
Fuse
Water supply pressure
Minimum
50 kPa (0.5 bar)
Maximum
800 kPa (8 bar)
Capacity
12 place settings
Technical specifications
This appliance complies with the following E.E.C. Directives:
- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
