Electrolux EPN09C38HW, User Manual

Page: 9 / 112

9 ENGLISH
HEALTH BUTTON
Press the button to enable or disable the
the health function. If the function is ena-
bled, the symbol “ ” will be shown.
CLOCK BUTTON
Press the button to set the clock. If the
clock symbol “ ” or “ ” blinks, press
the Time +/- button to set the time. Keep
the button pressed for five seconds to
accelerate the process. Press the Set
button to set the clock. The clock symbol
stops blinking.
TIMER BUTTON
Press the button to set the timer function
for switching on/off the unit. If the Timer
symbol “ ” or “ ” blinks, press the
Time +/- button to set the timer. Keep
the button pressed for five seconds to
accelerate the process. Then press the
Set button to set the timer. Press the
Timer button again till the timer symbol
disappeared to cancel the timer function.
TIME +/- BUTTON
Press the button to increase/decrease the
time setting. Keep the button pressed for
five seconds to accelerate the process.
X-FAN BUTTON
In COOL or DRY mode, press the button
to enable or disable the X-FAN function.
Default setting: OFF.
LIGHT BUTTON
Press the button once to show the
ambient temperature.
Press the button twice in a row in
5 seconds to switch the display of the
indoor unit off.
Default setting: ON.
• Continuous pressing Light button
7 times in 10s, the unit will enter
the Wi-Fi binding status.
TEMP +/- BUTTON
Press the button to increase/decrease
the temperature.
Temperature range: 16-30°C.
FAN BUTTON
Press the button to set the fan speed:
LOW, MEDIUM, HIGH and AUTO. In the
AUTO and DRY mode, fan speed can
also be set.
/2: 0(' +, $872
SWING BUTTON
Press the button to activate swing
function. Press again to cancel it.
• Short press the button will
activate up/down swing. And
long 1 second press will activiate
left/right swing.
• For some models, you can
only adjust the louver left/right
manually.
TURBO BUTTON
Press the button to enable or disable the
turbo function. When enable the function,
the symbol “ ” will be shown
When in turbo function, the fan will run in
highest speed.
QUIET BUTTON
Press the button to enable or disable the
quiet function. When enable the function,
the symbol “ ” will be shown.
When in Quiet function, the fan will run in
slowest speed.
+10°C HEAT BUTTON
In Heat mode, press the button to enable
+10°C heat function. When enable the
function, the temperature will set with
10°C. Switch mode and adjust the temp
setting will cancel the setting.
SET BUTTON
In Timer and Clock setting, press the
button to confirm the setting.
RESET BUTTON
Press the button to reset the remote
controller, the set will back to default
setting.
LOCK BUTTON
Press this button to lock and unlock
the remote controller. When enable the
function, the symbol “ ” will be shown.
Default setting: OFF.