Electrolux EPN09C38HW, User Manual

Page: 14 / 112

14 www.electrolux.com
Setting the Clock
$
%
&
Before you start operating the air
conditioner, set the clock of the remote
controller using the procedure given
in this section. The clock panel on the
remote controller will display the time
regardless of whether the air conditioner
is in operation or not. After batteries are
inserted in the remote controller or press
the Reset button, “ ” will display and
begin to flash.
1. Press the Clock button ( A ) to set the
clock, and the symbol “ ” or “ ” will
flash.
2. Press the Time +/- button (B) to set
the desired time.
3. Press the Set button (C) to confirm the
setting and the symbol “ ” or “ ” will
stop flash.
Health Operation
$
Press the Health button ( A ) to activate
the Health function. The Cold Plasma
generator releases plasma which can
eliminate bacteria, viruses, dusts and
other harmful agents in the air. This
function is recommended when the
indoor air quality is in bad condition.
• When indoor fan motor is
running, it has healthy process
function.
X-Fan Operation
$
In Cool or Dry mode, press the X-Fan
button (A) on the remote controller,
indoor unit receives a signal from
remote controller and have a sound
and the panel flashes with “SC” for
3 seconds, and also flashes once every
0.5 seconds, then display is back to
the previous status; After receiving the
shutdown command, the indoor fan
continues to blow for 2 minutes with
“SC” display.