17
ENGLISH
5
6
7
8
User
Max. 5 m
Remote control
Portable AC
Remove the cover at the back of the
remote control�
Insert the provided batteries correctly(see
the instructions inside the battery
compartment)�
Close up the cover�
Battery Installation and Important
Instructions
7.2
Remote Control
1
2
5
3
7
4
8
6
Remote Control screen
Temp/Timer setting button
On/Off button
Mode button
Sleep button
Timer button
Swing button
Speed button
To replace the old batteries(which have
been used up)
with two new R03P “AAA” 1�5V batteries,
repeat the steps above�
If the remote control unit is replaced or
discarded, the batteries must be removed
and disposed of in accordance with
local legislation as they do harm to the
environment�
Do not mix old and new batteries�
Do not mix alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium)
batteries�
Do not dispose of batteries in fire� Batteries
may explode or leak�
If the remote control is not used for a long
time, remove the batteries from the remote
control�
The remote control must be handled with
extreme care� Do not drop it or expose it
to direct sunlight or sources of heat�
This device complies with Part 15 of the
FCC Rules� Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference
(2) This device must accept any
interference received, including interference
that may cause undesired operation�
Point the remote control at the location
of the signal receiver� The remote control
must be no more than 16 ft(5 metres)
away from the unit (without obstacles
between the remote control and the unit)�
*
Heat mode is not applicable to all models
