13
ENGLISH
)LJ
&XWWKLVWRILW\RXUZLQGRZ
Fig. 11
V
PP FUHZV
PPVFUHZVRUPP
KH[KHDGFDSVFUHZV
:LQGRZVWRRO
:LQGRZVOLGHUNLW
)LJ
)LJ
)RDPVHDO%
2.
Open the window sash and place the
window slider kit on the window stool
(Fig� 9)� Attach the window slider kit to
the window sill� Adjust the length of the
window slider kit according to the width
of window� Screw down the two screws
on the window slider kit� See Fig� 9�
4.
Drive two 12�7mm screws to secure the
window slider kit to the window sash�
(Fig� 11)
5.
Secure the window slider kit to the
window sill (Fig� 11):
A: For wooden window: Use 19mm
screws for securing�
B: For Vinyl-Clad windows: Use 12�7 hex
head cap screws for securing�
7.
Cut the Foam seal
*
to an appropriate
length and seal the open gap between
the top window sash and outer window
sash, as shown in Fig� 13�
*
= source locally
6.
To secure lower sash in place, attach
right angle Sash lock
*
with 12�7mm
screw as shown (Fig� 12)�
3.
Close the window sash securely against
the window slider kit� (Fig� 11)
Cut the adjustable window slider kit
if the width of window is less than
67�5cm (Fig� 10)�
It is difficult to lock the windows
with the safety lock for Vinyl-Clad
windows, so you can use lock by
window itself�
)LJ
VFUHZV
:LQGRZVOLGHUNLW
:LQGRZVWRRO
FPaFP
)LJ
)RDPVHDO$
DGKHVLYHW\SH
1.
Cut the Foam seal
*
(adhesive type)
to the proper lengths and attach them
to the window and stool� (Fig� 8)
5.2
Installation in a double-hung
sash window
