16
www.electrolux.com
Fan mode
In this mode, there is no need to use the
exhaust hose or drainage hose�
1.
Press the "mode" button until the Fan
mode indicator is lit�
2.
Press the "Fan speed" button to choose
the desired fan speed�
3.
The fan will run at the selected speed
and the display will show the room
temperature�
Filter reset
Auto mode
Timer mode
How to delay startup (Timer on)
How to delay shutdown (Timer off)
Sleep mode
Always have the exhaust hose attached in
this mode�
When you set the air conditioner in Auto
mode, it will automatically select cooling,
heating (not applicable for cooling only
models), or fan only operation depending
on what temperature you have selected
and the room temperature� The air
conditioner will control room temperature
automatically round the temperature point
set by you�
The fan speed is automatically selected in
"AUTO" mode
1� Press the "mode" button until the "Auto
mode" indicator lights�
After the "Auto mode" is selected the unit
will run automatically according to the
actual room air temperature�
The timer facilitates the user to delay the
unit startup or shutdown�
Plug in the unit, the buzzer will sound
once, the LED will be displayed for 1
second, so the unit turns to standby�
Press the “timer” button, then the Timer
indicator will switch on and the number of
hours on the screen will show "0�0"�
Tap or hold the UP "
+
" or the DOWN "
-
"
button to change delay start timer at 0�5
hour increments up to 10 hours, then at 1
hour increments up to 24 hours� Press the
“timer” button again within 5 seconds, you
will quit the timer setting directly�
After 5 seconds, the timer function
is enabled, the display will show the
temperature back� The control will count
down the time remaining until startup�
The unit will start up in the mode as
previously set�
To cancel the timer setting, press the
You can delay shutdown when the unit is on�
Press the “timer” button, then the Timer
indicator will switch on and the number of
hours on the screen will show "0�0 "�
Tap or hold the UP "
+
" or the DOWN "
-
"
button to change delay stop timer at 0�5
hour increments up to 10 hours, then at 1
hour increments up to 24 hours� Press the
“timer” button again within 5 seconds, you
will quit the timer setting directly�
After 5 seconds, the timer function
is enabled, the display will show the
temperature back� The control will count
down the time remaining until shuts down�
To cancel the setting, press the “timer”
button again will show the remaing time and
press the button again to quit the function�
You can also cancel the setting by pressing
the “on/off” button� After cancel the setting,
the timer indicator will switch off�
Activating this feature will give you a
comfortable temperature and help save
energy�
The "sleep" mode can only be selected
when the unit is in Cool, Heat (applicable
models only) or Auto mode�
This feature is a reminder to clean the Air
Filter (See Care and Cleaning) for more
efficient operation�
The filter indicator will illuminate after 250
hours of operation� To reset after cleaning
the filter, press the “filter reset” button,
then the “filter” indicator will go off�
°F/°C function
Press the "
-
" and "
+
" button the same
time for more than 3 seconds to switch
between degree Fahrenheit and degrees
Celsius� Under Dry/Fan mode, you can not
select °F/°C�
Press the “swing” button to enable louvre
swing function, the louvre on the top panel
will swing up and down�
Press this button again to disable the
louvre swing function�
Louvre Swing Function
Note:
In this mode, auto speed cannot be
selected�
"timer" button again and the display will
show the remaining time� Press the button
again to quit the function� You can also
cancel the setting by pressing the “on/
off” button� After cancelling the setting, the
timer indicator will switch off�
