44
electrolux
installation
•
Position the appliance in front of the
cabinet.
•
Take out all oven furniture before
installation to reduce the weight you
need to lift. The oven door should be
taped to keep it closed whilst lifting.
•
To place the appliance into the space
between cabinetry follow the
procedure below:
Two people will be required to carry out the
lifting procedure.
Warning: Do not attempt to lift this
appliance by the handle(s).
•
Each person should squat either side
of the appliance.
•
Tilt the appliance so that your hands
can support the underside of the
appliance.
•
Keeping your back straight raise the
appliance to the correct height by
straightening at the knees.
•
Rest the rear underside of the
appliance on the mounting brackets
while your hands support the front.
•
The appliance can be pushed fully into
the space. Take care to avoid fouling
the mains lead.
•
Ensure the appliance is central and
level.
•
When the appliance is fully housed,
screw the stability screws (supplied
with the appliance) into the underside
of the worksurface in the positions
indicated, taking care not to distort the
trim. It is advisable to turn each screw
alternatively to avoid damaging the
trim.
•
Place the heat deflector flush with the
edge of the worksurface, with the cork
spacers up over and screw into
position using the screws supplied with
the appliance. Failure to do this may
cause damage to the work surface
•
Replace the plinth board.
•
Switch on the appliance and refer to
the operating instructions.