38
electrolux
care and cleaning
If the door glass panel becomes
chipped or has deep scratches the
glass will be weakened and must
be replaced to prevent the
possibility of the panel shattering.
Please contact your local service
force centre who will be pleased to
advise further.
To replace the outer door glass
1.
Holding the oven glass with both
hands, gently place the locators
into the holes of the brackets at the
bottom of the oven door.
2.
Holding the door glass with your
left hand, use your right hand to
open the oven door. Bring the door
gently towards the glass panel
ensuring the screw location holes
line up.
3.
Place the trim in the correct
position on the top of the grill door.
4.
Hold the glass in place with one
hand and insert the crosshead
screws with washers into the
location holes with the other hand.
Give the screws one turn to ensure
the glass is secure.
5.
Tighten the screws positively with a
Pozidrive screwdriver before
closing the oven door.
Do not attempt to use the oven
without the glass being in place.
Replacing an oven light bulb
The type of bulb required is a 300°C 25
watt small Edison Screw.
Disconnect the appliance from the
electricity supply before replacing
the bulb.
1.
Make sure the appliance is cool
before replacing the bulb.
2.
Open the oven door and remove
the shelves and wirework runners.
3.
Pull the glass bulb cover towards
you and then pull it off. If necessary,
use a screwdriver to carefully lever
off the cover, taking care not to
damage the oven cavity.
4.
Unscrew the bulb by turning it to
the left.
5.
Fit a new bulb and then replace the
glass bulb cover.
6.
Refit the wirework runners and
replace the shelves.
7.
Restore the electricity supply.