TSE-P 10.00 FV
30/38
599 34 41-93
DISASSEMBLY OF THE TOP PANEL
To disassemble the top panel:
- Remove the oven from the cabinet.
- Disconnect the gas connection.
- Unscrew the fixing screws of the panel
(see Fig. 40).
Fig. 40
1 - TOP PANEL
2 - GAS SOLENOID VALVE
3 - GAS INLET PIPE
4 - PROTECTION THERMOSTAT
(FAN CONTROL)
5 - GRILL HEATER
ELECTRICAL CONNECTORS
6 - SAFETY THERMOSTAT
7 - TANGENTIAL COOLING FAN
DISASSEMBLY OF THE OVEN LAMP AND THE LAMPHOLDER
To gain access to the oven lamp it is sufficient to loosen the glass lampholder-cover from the inside of the
oven compartment (see Fig. 40).
To gain access to the lampholder it is necessary to:
- Disassemble the rear panel.
- Disconnect the connection wires, marking the various positions.
- With a screwdriver, lever up the fixing tabs of the lampholder and remove the lampholder from the internal
part of the oven (see Fig. 42 page 30).
Fig. 41
1 - GRILL HEATER
2 - OVEN LAMP
3 - LAMPHOLDER COVER
4 - OVEN LAMPHOLDER