TSE-P 10.00 FV
21/38
599 34 41-93
BUILDING IN
LOCATION OF APPLIANCE
The appliance may be located in a kichen, a
kitchen/diner or bedsitting room but not in a
bathroom, shower room or bedroom.
It is essential that there is a minimum clearance of
3 mm between the top surface of the appliance and
the inside top of the cabinet. The unit must be fitted
into a cabinet conforming to Fig. 22.
This oven unit may be used in a Built-in or a Built-
under situation (see relevant diagrams). If the
appliance is to be installed under a hob, it is
recommended that the hob be installed before the
oven unit.
Please ensure that when the oven is installed it is
easily accessible for the engineer in the event of
a breakdown.
BUILDING IN
The surround or cabinet into which the oven will be
built must comply with these specifications:
• the dimensions must be as shown in the relevant
diagrams;
• the materials must withstand a temperature
increase of at least 60°C above the ambient
temperature;
• proper arrangements must be made for a
continuous supply of air to the oven to prevent the
oven from overheating.
Dimensions of the oven and recess required are
given in the relevant diagrams (in millimetres).
Fig. 21
Fig. 22
Fig. 23
Fig. 24