![Electrolux EOB7S01X User Manual Download Page 50](http://html.mh-extra.com/html/electrolux/eob7s01x/eob7s01x_user-manual_2383151050.webp)
Problem
Possible cause
Remedy
The food sensor does not
operate.
The plug of the food sen‐
sor is not correctly installed
into the socket.
Put the plug of the food
sensor as far as possible
into the socket.
It takes too long to cook
the dishes or they cook too
quickly.
The temperature is too low
or too high.
Adjust the temperature if
necessary. Follow the ad‐
vice in the user manual.
Steam and condensation
settle on the food and in
the cavity of the oven.
You left the dish in the
oven for too long.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
The display shows "C2".
You want to start the De‐
frost function, but you did
not remove the food sen‐
sor plug from the socket.
Remove the food sensor
plug from the socket.
The display shows an error
code that is not in this ta‐
ble.
There is an electrical fault. • Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
The descaling procedure is
interrupted before it finish‐
es.
There was a power cut.
Repeat the procedure.
The descaling procedure is
interrupted before it finish‐
es.
The function was stopped
by the user.
Repeat the procedure.
There is no water inside
the grill- / roasting pan af‐
ter the descaling proce‐
dure.
You did not fill the water
drawer to the maximum
level.
Check if the a descaling
agent / water is present in
the water drawer body.
Repeat the procedure.
There is dirty water on the
bottom of the cavity after
the descaling cycle.
The grill- / roasting pan is
on a wrong shelf position.
Remove the residual water
and the descaling agent
from the bottom of the
oven. Put the grill- / roast‐
ing pan on the first shelf
position.
The cleaning function is in‐
terrupted before it finishes.
There was a power cut.
Repeat the procedure.
The cleaning function is in‐
terrupted before it finishes.
The function was stopped
by the user.
Repeat the procedure.
www.electrolux.com
50
Summary of Contents for EOB7S01X
Page 54: ...www electrolux com 54 ...
Page 55: ...ENGLISH 55 ...