electrolux
installation
25
Installation
Installing the appliance
1. Remove all packaging and check
carefully for any signs of damage.
2. This oven is designed to fit into a
360 mm high cupboard as standard.
When fitting into a 350 mm high
cupboard:- Unscrew and remove the
4 feet from the bottom of the oven.
There are 3 tall feet and 1 short foot.
Replace the 3 tall feet with those
provided in the accessory pack. Do
not replace the short foot.
3. Fit the appliance into the kitchen
cupboard slowly, and without force,
until the front frame of the oven seals
against the front opening of the
cupboard.
4. Ensure the appliance is stable and not
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and
the top of the frame (see diagram).
Fixing Option 1:
Fix the oven in position with the screws
provided. The fixing points are located on
the top and bottom corners of the oven.
Fixing Option 2:
Please see the template sheet supplied
with this oven.
Safe use of the appliance
If fitting the microwave in position
B or C:
• The cupboard must be a minimum of
500 mm (E) above the worktop and
must not be installed ddiirreeccttllyy above a
hob.
• This appliance has been tested and
approved for use near domestic gas,
electric and induction hobs only.
• Sufficient space between hob and
microwave should be allowed to
prevent overheating of microwave
oven, surrounding cupboard and
accessories.
• Do not operate the hob without pans
when the microwave oven is operating.
• Care should be taken when attending
to the microwave oven while the hob is on.
4 mm
E
D
Position A
Conventional
oven
Position B
Position C Position D
The microwave can be fitted in
position A, B, C or D:
Position
Niche Size
W D H
A
560x550x360
B+C
560x300x350
560x300x360
D
560x500x350
560x500x360
Measurements in (mm)
