Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds.
7. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
8. The appliance deactivates
automatically.
6.6 Setting the MINUTE
MINDER
1. Press again and again until
starts to flash.
2. Press or to set the necessary
time.
The Minute Minder starts automatically
after 5 seconds.
3. When the set time ends, an acoustic
signal sounds. Press any button to
stop the acoustic signal.
4. Turn the knob for the oven functions
to the off position.
6.7 Cancelling the clock
functions
1. Press the again and again until
the necessary function indicator
starts to flash.
2. Press and hold .
The clock function goes out after some
seconds.
7. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
7.1 Using the core temperature
sensor
The core temperature sensor measures
the core temperature of the meat.
There are two temperatures to be set:
• The oven temperature. Refer to the
table for roasting.
• The core temperature. Refer to the
table for the core temperature sensor.
CAUTION!
Only use the core
temperature sensor supplied
with the appliance, or
genuine replacement parts.
1. Put the plug of the core temperature
sensor into the socket on the front of
the appliance.
The indicator for the core temperature
sensor
flashes.
2. Put the point of the core temperature
sensor into the centre of the meat.
3. Press the button or to set the
core temperature. You can set the
temperature from 30 °C to 99 °C.
4. Set the oven function and the oven
temperature.
When the meat is at the set core
temperature, an acoustic signal sounds
for two minutes. Press a button to stop
the signal.
5. Deactivate the appliance.
6. Remove the plug of the core
temperature sensor from the socket.
Remove the meat from the
appliance.
If the meat is not cooked to your
satisfaction, do the above steps again
and set a higher core temperature.
ENGLISH
11
