The ovens
25
TO
CLEAN
BETWEEN
THE
TWO
PANES
:
1
Check that the oven is not hot and that the door
catch is activated before you remove the outer
section, the door front.
2
Open the door and insert rolled-up oven cloths
between the hinges
(
SEE
PICTURE
)
. These to pre-
vent the door from closing. Raise the door up
again.
3
Grasp the door handle and press in the two
springs on the top edge of the door downwards,
then lift off the door front.
4
After cleaning (use a window-cleaning product),
slot the the door front back into the bracket
(
SEE
PICTURE
)
. If the glass is very soiled, use the
scraper supplied with the cooker. Make sure the
door is properly secured on both sides.
5
Press the two springs on the top edge of the door
and press the door front into place.
6
Remove the oven cloths.
To change an oven light bulb
1
Make sure the oven is not hot and that both the
ovens are turned off.
2
Release and remove the removable side rack.
3
Release the glass cover, for example by insert-
ing a short, blunt knife between the glass cover
and the oven wall. Hold one hand under the
glass so that it does not fall and break.
4
Unscrew the bulb and fit a new one. It should
have an E14 screw fitting, marked 230–240 V,
25 W and 300°C.
5
Refit the glass cover and the removable side
rack.
The fan
You can remove the fan blades for cleaning, but
DO
SO
WITH
CARE
, as they have sharp edges.
1
Make sure the oven is turned off and is cold.
2
Unscrew the four screws (A) and remove the
back wall of the oven.
3
Take hold of the fan impeller carefully and undo
the nut (B), by turning it clockwise with a small
adjustable spanner.
4
Clean the fan blades in hot soapy water.
5
Refit all the parts. Make sure all the screws are
securely in place.
2
4
3
B
A
Summary of Contents for EK 6173
Page 1: ...cooker INSTRUCTION BOOK EK 6173 821 02 90 03 ...
Page 35: ......