background image

All specifications subject to change without notice.

Phone: (800) 793-0093

www.dacor.com

PLANNING

GUIDE

ETT304-1, ETT365-2

Renaissance

® 

30” and 36” Wide,

Electric Cooktops

Document # PG03-002

Revised 10/03/12   Page 1/3

PRoDUCT DImENsIoNs - ETT365-2

36 1/4" *

(92.1 cm)

34 3/8"

(87.3 cm)

19 3/8" 

(49.5 cm)

21 1/4" *

(54.0 cm)

4” (10.2 cm)

chassis height

3/16” (4.8 mm)

30 1/4" *

(76.8 cm)

28 3/8"

(72.1 cm)

19 3/8" 

(49.5 cm)

21 1/4" *

(54.0 cm)

4” (10.2 cm)

chassis height

3/16” (4.8 mm)

PRoDUCT DImENsIoNs - ETT304-1

Product tolerances: ±1/16” (±1.6 mm) unless otherwise noted

NOTES:

1.  The cooktop is supplied with a flexible, 48 inch long 

power conduit consisting of two (2) insulated hot lead 

conductors (L1 and L2) and one (1) insulated ground 

conductor. There is no neutral connection. All leads are 

copper. The conduit is connected to the right corner of 

the cooktop. Do not connect the ground wire to neutral.

2.  Tested in accordance with the latest edition of ANSI 

Z21.1 and U.L. 858 Standard for household cooking 

appliances.

3.  These cooktops are not approved for recessed 

installation.

Model No.

Electrical Circuit Required

Total Connected 

Load*

Minimum Supply Wire Size 

Line and Ground Connections

ETT304-1

240 Vac, 60 Hz, 40 Amps.

6.9 kW (29 Amps.)

No. 8 AWG

ETT365-2

240 Vac, 60 Hz, 40 Amps.

9.1 kW (38 Amps.)

* For reference only, See the product data label on bottom of unit for exact specifications.

 ELECTRICAL sUPPLy REqUIREmENTs

 WARNING

• 

Observe all governing codes and ordinances during planning 

and installation. Contact your local building department for 

further information. 

• 

This appliance must be installed in accordance with the 

accompanying installation instructions.

* For units with stainless steel trim, other units may be up to 1/8" less.

Reviews: