background image

Problems and actions needed

33

Problems and actions needed

Never attempt any repairs or work on the cooker which could cause injury or damage the product. If you cannot 
solve the problem after checking the list below, contact a service company approved by the supplier.

Problem

Action needed

The cooker has no electrical supply

Check that: 
• 

THE

 

FUSE

(

S

) has not gone

• 

THE

 

PLUG

 is pushed in correctly

• 

THE

 

RCD

 (if fitted) has not tripped

The cooker is not working and a line appears in the 
information window

Please, contact service

The hotplate is not working and ”SAFE” appears in the 
information window

Check whether the hob safety lock is deactivated. Use the 
locked hob or deactivate the hob safety lock (see page 14)

The hotplates are not working and a line appears in the 
information window

The power supply to the hob has cut out for safety reasons 
(see page 12). Reset all controls and then turn on the hotplate 
you want to use.

Boiling/frying takes a long time

Check you have a suitable pan that conducts heat properly 
(see page 12)

The buttons for the oven are not working

Deactivate the oven safety lock (see page 27)

The oven light is not working

Replace broken bulb (see page 25)

The door safety catch isn’t working

Activate the door safety catch (see page 6)

The roasting sensor is not working

Check that the sensor is correctly plugged in inside the oven. 
Take it out and plug it in again. Set the required temperature 
(see page 21)

The clock is not showing the right time/not 
working

Set the correct time (see page 6)

The timer is not working

Set the time required (see page 19)

Summary of Contents for EK 6173





































Reviews: