Electrolux EIFLW55H MB, Technical & Service Manual

Page: 53 / 90

Electronic Control
3-17
Brightness
Press the button beneath the plus (+) or minus (-)
symbols to increase or decrease the brightness of the
display. Press select to accept the change or press the
button under EXIT to return to normal operation without
any changes.
Volume
Press the button beneath the plus (+) or minus (-)
symbols to increase or decrease the volume of the chime.
Press select to accept the change or press the button
under EXIT to return to normal operation without any
changes.
Language
Select English, French or Spanish for the display
language.
Cycle Description
The name, an icon and a brief description are displayed
for each cycle. To delete the display, press select. To
restore the display, press select and “CYCLE DESC ON -
press SELECT to turn OFF” will appear in the LCD User
Interface.
Status Display
The estimated total cycle time will be displayed when
the cycle is selected. The time may increase if water
pressure is low, oversudsing occurs or the load becomes
unbalanced. The approximate time remaining will be
displayed during the cycle. A situation where oversudsing
has been detected by the washer will result in the washer
automatically adding up to 4 extra rinses to attempt to
clear the suds. Each extra rinse the washer performs to
clear the suds will add 5 minutes to the cycle display time.
If an excessive amount of detergent has been added
and additional rinsing has not corrected the issue, “TOO
MUCH DETERGENT” will be displayed.