11
Removing the Doors
Once both doors are in place, ensure they are
aligned with each other and level (Please see
the “Installation” section for more details), and
replace the top hinge cover.
CAUTION
Be sure doors are set aside in a secure
position where they cannot fall and
cause personal injury, or damage to the
doors or handles.
NOTE
You will be pulling approximately five feet of
water tube from the back of the refrigerator.
Press
Press
Approximately
5 feet
Water
Line
Lower Hinge Removal
To reinstall the right door, reverse the above
steps.
Removing Freezer Drawer
1 Open freezer drawer.
2 Remove drawer screws on right and left
sides (two screws on each side).
3 Lift drawer up and out to remove.
Installing Freezer Drawer
1 With lower slides pulled out, hang
drawer onto slide brackets ensuring pins
on each side are fully inserted into slots
on each side.
CAUTION
Drawer is heavy. Use caution when lifting.
Remove
Hex
Head Drawer
Screw
Remove hex
head drawer
screw
Remove
Hex
Head Drawer
Screw
Remove hex
head drawer
screw
Do Not Remove
Other Screws
NOTE
When reinserting the water tube and
replacing the top hinge cover, use care to
be sure you do not kink the tube.
Assembly
Pin
Slot
Cabinet
Fully Extend
Drawer Slides