Electrolux EHL6650P, Installation And Operating Instructions Manual

Page: 12 / 68

12
1
Problem Dirt
1. Remove burnt-on sugar, melted plastic, aluminium
foil or other meltable materials with a glass scraper
immediately and while still hot .
1
Important: There is a risk of burning yourself
when the glass scraper is used on a hot cook-
ing zone!
2. Then clean the hob normally when it has cooled
down.
3
If the cooking zone on which something has
melted has already cooled down, warm it up
again for cleaning.
Scratches or dark marks on the ceramic glass
surface, caused for example by a pan base
with sharp edges, cannot be removed. How-
ever, they do not impair the function of the
hob.
What to do if
…
Rectifying faults
It is possible that faults have been caused by a minor
error, which you can correct yourself with the help of
the following instructions. Do not attempt any further
repairs if the following instructions do not help in
each specific case.
1
Warning! Repairs to the appliance are only to
be carried out by approved service engineers.
Improperly effected repairs may result in con-
siderable risk to the user. If your appliance
needs repairing, please contact your specialist
dealer or customer service.
What to do when …
… the cooking zone does not function?
Check whether
– the fuses in the house installation (fuse box) are in-
tact. If the fuses switch off, or blow, several times,
please call a qualified electrician.
– the corresponding cooking zone is switched ON
and the desired heat setting has been selected.
– for cooking zones with several rings, the desired
ring has been switched ON.
If a service engineer's visit is necessary due to incor-
rect operation, the service visit will not be free of
charge, even during the guarantee period.