Electrolux EHGL30X, User Manual

Page: 25 / 32

45°
3. Close the door until it is at an angle
of approximately 45°.
4. Hold the door with one hand on each
side and pull it away from the appli-
ance at an upwards angle.
Put the door with the outer side
down on a soft and level surface
to prevent scratches.
Inserting the door
To insert the door do the above steps in
the opposite sequence.
10.4 Lamp
WARNING!
Danger of electrocution! Discon-
nect the fuse before you replace
the lamp.
The lamp and the lamp glass cov-
er can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the
interior of the appliance. It pre-
vents damage to the lamp glass
cover and the cavity.
Always use the same lamp type.
Replacing the top lamp:
1. Turn the lamp glass cover counter-
clockwise to remove it.
2.
Clean the glass cover.
3. Replace the lamp with a halogen, 230
V, 40 W, 300 °C heat resistant oven
lamp.
4. Install the glass cover.
Replacing the side lamp:
1. Remove the left shelf support to get
access to the lamp.
2. Use a narrow, blunt object (e.g. a tea-
spoon) to remove the glass cover.
Clean the glass cover.
3. Replace the lamp with a halogen, 230
V, 25 W, 300 °C heat resistant oven
lamp.
4.
Install the glass cover.
5.
Install the shelf support.
11. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
ENGLISH 25