3
Hob Burners Control Knobs
The hob burners control knobs are situated on the hob
front panel. The symbols on the knobs mean that :
"
there is no gas supply
there is maximum gas supply
there is minimum gas supply
Lighting the Burners
• For easier lighting, proceed before putting a pan
on the pan support.
•
Push the relevant knob down and turn it anti-clockwise
until it reaches the "maximum" position (
).
•
After lighting the flame, keep the knob pushed down
for about 5 seconds. This will allow the "thermocouple"
(Fig. 1 - lett. D) to be heated and the safety device to
be switched off, otherwise the gas supply would be
interrupted.
•
Then, check the flame is regular and adjust it as
required.
If you cannot light the flame even after several attempts,
check the "cap" (Fig. 1 - lett. A) and the "crown" (Fig.
1 - lett. B) are in the correct position. To put the flame
out, turn the knob to the symbol
"
.
When switching on the mains, after installation or
a power cut, it is quite normal for the spark
generator to be activated automatically.
•
In the absence of electricity, ignition can occur without
the electrical device; in this case approach the burner
with a flame, push the relevant knob down and turn it
anti-clockwise until it reaches the "maximum" position.
• Always turn the flame down or put it out before
taking the pans off the burner.
Contents
This appliance complies with the following
E.E.C. Directives:
- 73/23
-
90/683
(Low Voltage Directive);
- 89/336
(Electromagnetical Compatibility Directive);
-
90/396
(Gas Appliances)
- 93/68
(General Directives)
and subsequent modifications.
MANUFACTURER:
ELECTROLUX HOME PRODUCTS ITALY S.p.A.
Viale Bologna 298 - 47100 FORLI’ (Italy)
Instruction for the User
Important Safety Information
2
Instruction for the User
3
Maintenance and Cleaning
5
Service and original spare parts
6
Technical Data
6
Instruction for the Installer
7
Electrical connection
8
Adaptation to different types of gas
9
Building In
10
For the User
For the Installer
!
!
!
!
!
Fig. 1
A
- Burner cap
B
- Burner crown
C
- Ignition electrode
D
- Thermocouple
A
B
D
C
triple crown burner