15
3.
Next, touch the sensor field
-
and set the required
continued heat setting
1
to
8
. The heat setting se-
lected for further cooking then is displayed.
After 5 seconds,
a
appears in the display again in-
stead of heat setting selected for further cooking.
The heat setting is displayed again after the heating-
up time has ended.
3
If you select a higher heat setting when the au-
tomatic function is in operation, e.g. from
3
to
5
, the previous heating-up time is taken into
account. If you select a lower setting, then the
automatic function is brought to an immediate
end. If you start cooking again on a cooking
zone that is still warm, the automatic heating-
up function uses the residual heat. This saves
time and energy.
Cooking without the Automatic
Heating-Up Function
1.
For heating up/browning, select a high power.
2.
As soon as steam forms or the fat is hot, switch
back to the required heat setting for the remainder
of the cooking time.
3.
Reset to zero in order to end cooking.
2
Note:
When cooking with the induction cooking
zone you should take into account that
–
the heating-up times are reduced by the direct en-
ergy transfer to the pan!
–
the cooking process stops immediately after the
cooking zone is switched off (no boiling over!)
Summary of Contents for EHD 8680 U
