Electrolux EHD 8680 U, Installation And Operating Instructions Manual

Page: 12 / 36

12
Operating the Hob ng the Hob
Touch Control Sensor Field Field
To operate the Touch Control sensor field place your
finger from above flat onto the required field until the
appropriate displays come on or go out or the re-
quired function is carried out.
Switching On the Appliance
The entire appliance is switched on using the “On/
Off”
n
sensor field.
Touch the “On/Off” sensor field for approx. 2 sec-
onds.
The digital displays will show
j
and the decimal
point will flash.
3
Once the “On/Off” sensor field has been oper-
ated to switch on the appliance, one of the
cooking zones must be selected within ap-
prox. 10 seconds using the cooking zone se-
lection buttons. Otherwise the appliance
switches off again for safety reasons.
Switching Off the Appliance
To switch off the appliance completely activate the
“On/Off”
n
sensor field.
Touch the “On/Off” sensor field for approx.
1 second.
3
When an individual cooking zone or the entire
hob is switched off, any residual heat is shown
with an
h
(for “Hot”) in the digital display for
the appropriate cooking zones.
Cooking Zone Selection
To select the required cooking zone touch the corre-
sponding sensor field for approx. one second.
A zero with a decimal point will light up in the appro-
priate cooking zone display window
0
.
3
The decimal point indicates that settings may
only be made for this cooking zone.