7
ENGLISH
Control panel on/off function
With the hood in standby, press key
1
, all
led lights will switch off : the control panel
is off .
Press key
1
again, all led lights will turn
on: the control panel is active.
Carbon fi lter saturation control
activation/deactivation function
With the hood in standby, press key 5 for
longer than 3 seconds
Key
7
will fl ash to indicate that the carbon
saturation fi lter has been activated.
Key
7
will remain lit to indicate that
the carbon saturation fi lter has been
deactivated.
Filter saturation control and reset
function
At regular intervals and depending
on the hood temperature, key 7 lights
up to indicate that the fi lters need to
be maintained in accordance with the
instructions in the relative paragraphs.
Key
7
on with a fi xed light: maintenance is
required on the grease fi lters
Key
7
on and fl ashing: maintenance is
required on the carbon fi lter.
Filter saturation indicator reset
With the hood in standby, press key
7
for
longer than 3 seconds.
Repeat the operation if necessary..
5.1 Hob²Hood
The hood is equipped with a function for
wireless connection with the cooktop for
automatic adjustment of the most suitable
speed. Refer to the instruction manual of
the cooktop to verify the presence and
compatibility of this function.
In the case of fi rst connection to the mains
or abrupt disconnection from power supply
(blackout), wait 1 minute to allow the hood
to restore the connection with the cooktop.
When the hood is working in Hob²Hood
mode, key
8
is lit.
6. LIGHTING
The hood is equipped with a lighting system
based on LED technology.
The LEDs guarantee an optimum lighting,
a duration up to 10 times as long as the
traditional lamps and allow to save 90%
electrical energy.
Caution!
Do not look directly into the
LED light.
To replace lights, contact authorised spare
part center.
Summary of Contents for EFL716Y
Page 1: ...EFL716Y EFL719Y ...
Page 160: ...LIB0148554A Ed 03 19 ...